Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Cable connections
Connector
SPDIFF
NOTE: When connecting a device via the Side AV input, you have to use the supplied connection cables
to enable connection.See the illustrations above. | To enable PC audio, you will need to use the supplied SIDE
AV CONNECTION cable's WHITE & RED inputs. | If an external device is connected via the SCART socket, the
TV will automatically switch to AV mode.| When receiving DTV channels (Mpeg4 H.264) or while in Media Browser
mode, output will not be available via the scart socket. | When using the wall mounting kit (optional), we recommend
that you plug all your cables into the back of the TV before mounting on the wall. | Insert or remove the CI module
only when the TV is SWITCHED OFF. You should refer to the module instruction manual for details of the settings.
You can use the VGA input for connecting a YPbPr device. To do this, you need a YPbPr to PC cable (Not supplied).
Type
Cables
Scart
socket
(back)
VGA
Connection
(back)
(Not supplied)
Audio output digital
(S/P D/F electrical)
Side Audio/Video
(side)
Connection Cable
HDMI
Input
(back)
SPDIFF
Connection
(back)
Side AV
Connection
AV Connection
(side)
Cable (supplied)
Headphone
output
(side)
YPbPr Video
Connection
(side)
YPbPr Connection
Cable (supplied)
USB
port
(side)
Common
Interface
(side)
(Not supplied)
PC Audio Cable
(Not supplied)
(Supplied)
(Not supplied)
(Not supplied)
(Not supplied)
(Not supplied)
(Not supplied)
- 32 -
Device
CAM
module

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis