Software Upgrade; Troubleshooting & Tips; Image Persistence - Ghosting; No Power - TechniSat Tareo 40 Bedienungsanleitung

pages are divided into groups or topics. When the
FASTEXT system is available, sections in a teletext
page will become colour-coded and can be selected
by pressing the coloured buttons. Press a coloured
button that corresponds to with your needs. The
coloured writings will appear, showing you which
coloured buttons to use when TOP text transmission
is present. Pressing Up or Down buttons commands
will request the next or previous page respec tively.
Digital Teletext (If available)
• Press the " " button. The digital teletext
information appears. Operate it with the coloured
buttons, cursor buttons and OK button.
The operation method may differ depending on the
contents of the digital teletext. Follow the instructions
displayed on digital teletext screen.
When the " " button is pressed again, the TV
returns to television broadcasting.

Software Upgrade

Your TV is capable of finding and updating new
software upgrades over broadcast channels. For
broadcast channels search, TV looks for the available
channels stored in your settings. So before a software
upgrade search, it is advised to auto search and
update all available channels.
1) Software upgrade search via user interface
• It is possible manually to check if there is a new
software upgrade for your TV set.
• Simply navigate on your main menu. Choose
Settings and select Other Settings menu. In Other
Settings menu navigate on to the Software Upgrade
item and press OK button to open Upgrade Options
menu.
• In Upgrade Options menu select Scan for upgrade
and press OK button.
• If a new upgrade is found, it starts to download
the upgrade. A progress bar indicates the remaining
download progress. When the download completes
with success a message is displayed for reboot to
activate new software. Press OK to continue with the
reboot operation.
2) Background search and upgrade mode
• While TV is connected to the Internet, it searches in
the background for the critical software upgrades. If
a critical software upgrade is found it downloads the
upgrade silently. When the download completes with
success a message is displayed for reboot operation
to activate new software. Press OK to continue with
the reboot operation.
3) 3.AM search and upgrade mode
• If Automatic scanning in Upgrade Options menu
is enabled, the TV wakes up at 03:00 and searches
broadcast channels for new software upgrade. If new
software is found and downloaded successfully, the
TV opens with the new software version at the next
power up.
Note on reboot operation: Reboot is the last step in the
software upgrade operation if download of the new software is
finished successfully. During the reboot the TV makes a final
initialization. In the reboot sequence the panel power is closed
and front led indicates the activity with a blinking. Around 5
minutes later the TV restarts with the new software activated.
• If your TV fails to restart in 10 minutes, unplug the
power for 10 minutes and re-plug again. The TV
should open with the new software safely. If you still
can not get the TV working, please kindly repeat
unplug and plug sequence a few times more. If
your set still can not operate, please call the service
personnel to fix the problem for you.
Caution: While led is blinking during reboot do not unplug
your TV's power. Doing this may cause your TV not to
re-open again and can only be fixed by service personnel.
Troubleshooting & Tips

Image persistence - ghosting

Please note that ghosting may occur while displaying
a persistent image (still or paused image). LED TVs'
image persistence may disappear after a short time.
Try turning off the TV for a while. To avoid this, do not
leave the screen in still picture mode for extended
periods.

No power

If your TV has no power, please check the power cord
plug is connected to the mains power socket.

Poor picture

1. Have you selected the correct TV system?
2. Is your TV or house aerial located too close to a
non-earthed audio equipment or neon lights, etc.?
3. Mountains or high buildings can cause double
pictures or ghost images. Sometimes you can improve
the picture quality by changing the direction of the
aerial. Is the picture or teletext unrecognisable?.
4. Check if you have entered the correct frequency.
5. Please retune the channels.
6. The picture quality may degrade when two devices
are connected to the TV at the same time. In such a
case, disconnect one of the devices.

No picture

1. No Picture means that your TV is not receiving a
transmission. Have you selected the correct button on
the remote control? Try once more. Also make sure
the correct input source has been selected.
2. Is the aerial connected properly?
3. Are the plugs connected tightly to the aerial socket?
- 42 -