Private Call; Receiving A Private Call; Sending A Private Call (Trunking Only) - Motorola MCS 2000 I Bedienungsanleitung

Private Call

Receiving a Private Call

When your radio receives a private call, the incoming
private call tone sounds and the display alternates
between
CALL RCV
and the home display. The green indicator (B) and the
call received icon flash.
Press the call button (12) or select the menu PVT
CALL to view the ID of the calling party.
If the PTT (F) is pressed within 20 seconds, the call is
answered and a private conversation can go ahead.
Note: If the call button (12) is not pressed, the
call will be initiated as a talkgroup call.
Exit the function when the conversation is over.

Sending a Private Call (trunking only)

Private calls can be selected either from a list or
directly via the keypad (with optional keypad micro-
phone).
MCS 2000 Model I
English
Note: If your radio has been so programmed, you
can press the call button for quick access to the
Private Call function. Using the mode selector (D),
you can scroll between last received ID, Private
Call lists and your own radio ID.
Press the call button (12) or select PVT CALL through
the menus.
The display shows the last ID transmitted or received.
List Selection:
Transmit to the displayed ID by pressing the PTT (F) or
choose another ID from the list by using the mode
selector (D).
To view the radio's own ID, use the mode selector (D)
until the display shows:
MY ID:
alternating with the radio's ID, e.g.:
741317
68P81083C05-C
page 9