Bluetooth Operation; Troubleshooting - Ibiza sound PORT-TFT12 Bedienungsanleitung

3. Select PHOTO via the buttons  and  on the remote control if you insert a USB/TF card with picture
files (JPEG). Press PLAY/PAUSE button (7) on the front panel or the remote control to display the
contents. Select a file via the  and  on the remote control or on the front panel (5 & 6) and press
PLAY/PAUSE on the remote control or the front panel.
4. Select EBOOK via the buttons  and  on the remote control if you insert a USB/TF card with text
files
5. SETTINGS:
Select the SETTINGS icon and press PLAY/PAUSE button.
Language: The default language is English. You can choose between Chinese and English.
Playing MP3 files
Connect a USB stick or TF card to the inputs 15 or 16 on the rear panel. Set the volume with the volume
control (1). Adjust the bass and treble with the controls (6) on the rear panel. Control the files via the
buttons 9 to 14 on the rear panel.
LINE INPUT (8)
Connect an AUX source to the AUX input (8) on the rear panel and press the input selector button (9) on
the rear panel until LINE is displayed.
VIDEO OUT (7)
Connect an RCA video lead to this socket and to the RCA input socket of your TV set, video projector, etc.

BLUETOOTH OPERATION

1. Turn on the unit and press the input selector button on the unit to select the Bluetooth function.
2. Activate the Bluetooth feature on the external device to be paired.
3. Initiate a search for devices. The device shows up as "BT SPEAKER".
4. Press the   button to start playing and the buttons  and  for the selection of songs.
Trouble shooting
If a problem occurs, follow the steps in the table below. If problem still can't be solved, please contact your
retailer.
Problem
No sound when power
on
No sound from the
microphone
No sound after
inserting USB/TF card
If Speaker makes loud
noises
©Copyright LOTRONIC 2017
Possible cause
1. No input source
2. Volume down
1. Bad mic connection
2. Mic not switched on
3. Mic volume down
1. Incorrect file format
2. Bad connection of USB/TF card
3. The USB/TF is plugged into the
front-mounted inputs
1. Microphone switched on but
may be too close to the speaker
2. Microphone switched on but is not
being used.
3. Microphone volume may be too
PORT-TFT12
Solution
1. Connect an AUX signal, USB, TF
or Bluetooth source
2. Adjust volume
1. Plug in the mic properly
2. Switch mic on
3. Increase mic volume
1. File format should be MP3
2. Plug in USB/TF card properly
3. Switch on the MP5 POWER
switch on the rear panel
1. Keep the microphone 2
meters away from the speaker
2. Turn off microphone if not in
use.
3. Adjust microphone
6