Bluetooth Function - Ibiza sound PORT15VHF-MKII Bedienungsanleitung

POWER SUPPLY: BATTERY & AC OPERATION
Prior to using this system for the first time, please insert the supplied mains adaptor into the DC input socket
(24) and plug the other end on a suitable wall outlet. The charge indicator lights up in orange indicating that
the battery is charging. Let the unit charge continuously until the indicator (21) lights up in green.
NOTE: Please shut down the power switch after you have finished using the system.
1. PRIOR to using the unit for the first time, please charge fully the battery without any interrup-
tion.
2. Charge the battery regularly after each use. Don't wait until it is discharged!
3. DON'T allow the battery to discharge completely! Once the battery is fully discharged, the
current drain for recharging will be so high that it will damage the charger and/or the power
supply of the unit.
4. If you don't use the unit for a longer period of time, please CHARGE THE BATTERY COMPLE-
TELY AT 100% and check/charge it once per month otherwise the battery will be out of use.
The life time of the battery depends on the observance of these recommendations.
We cannot be held responsible for damaged batteries further to the non-observance of these
PLAY MP3/WMA MUSIC
1. Switch on power (23). The LED indicator (22) lights up in green.
2. Insert a USB stick (1) or an SD card (13) into the relevant input
3. Select USB via the MODE button (3) (only PORT15VHF-MKII)
4. Select a title via the  or  buttons and press ▶ǁ (16)
TO PLAY LINE IN MUSIC
1. Insert an RCA plug into the LINE IN sockets (8)
2. Insert a wired microphone into MIC INPUT (9)
3. Adjust the MIC VOL (5)
VOX FUNCTION
When VOX function is enabled, the music level will decrease when somebody talks into one of the microphones. The music
level becomes normal when the user stops talking into the microphone.
To activate this function, switch the VCV switch (19) to on. If you want to disable this function, set this switch to off position
REC FUNCTION (only PORT15VHF-MKII-TWS)
Disconnect the speakerbox from your Bluetooth device. Insert a USB stick or SD card. The speaker will automatically switch
into USB/SD mode. Connect now the speakerbox to your Bluetooth device and start playing your music. Short press the REC
button to record your voice and the music on the inserted USB stick or SD card. Press again to stop recording. Keep the REC
button pressed to play the recorded file.

BLUETOOTH FUNCTION

1. Switch on your Bluetooth device and activate the Bluetooth connect function
2. Select IBIZA-PORT in the list of found devices and connect.
3. Press the MODE switch to BT function,
4. Now you can play Bluetooth music.
TWS FUNCTION
This function allows to pair 2 units of the PORT-MKII-TWS range with 1 single Bluetooth source to enjoy wireless stereo
sound.
Turn off the Bluetooth feature on your smartphone. Switch on both speakers and select BT-AUDIO mode on both. Keep the
TWS button on one of the speakers (master speaker) pressed for a few seconds. If the connection was successful, you will
hear the message "left channel" from the master speaker, and "right channel" from the slave speaker. Activate the Bluetoo-
th function of your smartphone and select IBIZA-PORT in the list of found devices. Now the master speaker is connected to
your Bluetooth source. After that, you can use any mode to play music in TWS mode.
HOW TO USE THE VHF MICS
Switch on the VHF function by pressing the VHF button (27) to on. Switch on the VHF microphone via the switch on
the mic body. The box will automatically select the wireless microphone. Adjust the volume via the VHF mic volume controls
(6).
4
PORT15VHF-MKII / PORT15VHF-MKII-TWS
IMPORTANT NOTE ON BATTERIES
** BATTERIES ARE NOT COVERED BY THE WARRANTY **
basic rules.
© Lotronic 2023