Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before first Use
Remove the protection film form the blades and clean all parts of the multi grater
as described below under "Cleaning and Storing".
Using
1. Make sure that the multi grater sits steadily on a solid,
level surface or place the grater body on a suitable
bowl. The „sprockets" on the bottom of the grater
body have to hook on the bowl.
2. Select a blade and insert the blade in the
grater body. Press the blade as far as it will
go until the blade locks audible.
3. Pull the locking mechanism to unlock the food holder
and place the food holder on the grater body. Press
both locking mechanism inwards in order to lock the
food holder. Now you can slide the food holder easily
forth and back.
4. Insert the fruits or vegetables into the food holder.
Insert the pusher with the spiky side into the food so
the spiky pins can firmly hold the food.
Do not use too much pressure when using the
grater. Never grasp with your hand into the food
holder!
5. Do not overfill the bowl while grating. Hold the multi grater as shown in the
figure while grating.
Using
VII
Werbung
