Herunterladen Inhalt Inhalt Diese Seite drucken

Care And Maintenance; Specifications - CO/Tech CB1-4L-BS Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Use
Always read the vehicle handbook before charging its battery or removing any of its
battery leads.
1. Make sure that the battery is rechargeable before attempting to charge it.
The capacity of the battery should be between 1.2 Ah and 20 Ah.
Clean the battery terminals if necessary and use protective eyewear.
2. Select 6 V or 12 V depending on which type of battery you are going to charge.
3. Connect the positive (RED) battery clamp to the battery's positive terminal (+) and
the negative (BLACK) to the battery's negative terminal (-).
4. Connect the plug of the charger to the power supply.
5. The charger analyses the charge status of the battery and automatically begins to
charge it.
6. The red LED indicates that the battery is charging (0.75 A).
7. The green LED indicates maintenance charging (periodic pulse charging 0.2 A).
Battery is fully charged.
8. The battery can be connected for maintenance charging for long periods (several
months). Remember to check the level of the electrolyte (distilled water) in
the battery if it is to be connected for maintenance charging for long periods.
Disconnecting
When the battery has been charged, it should be disconnected as follows:
1. Pull out the plug from the wall socket.
2. Remove the black (negative) clamp.
3. Remove the red (positive) clamp.

Care and maintenance

Unplug the charger from the wall socket and wipe it with a soft, damp cloth.
Never use abrasive cleaning agents or solvents.
Disposal
Follow local ordinances when disposing of this product. If you are unsure of how to
dispose of this product, please contact your municipality.

Specifications

Dimensions
Weight
Capacity
Charging current
Operating temperature
100 × 65 × 35 mm
0.3 kg
1.2–20 Ah
0.2/0.75 A
0–30 °C
5

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Cb1-4l-vd

Inhaltsverzeichnis