remis REMIflair IV Montageanleitung Seite 9

Step 3: (Installation in the vehicle)
B6
B7
1/3 RA (B)
Center of
cutout
B8
B9
B10
B6:
Position the frame over the window aperture and mark the
upper cassette.
B7:
Secure the cassette holder with 2 countersunk screws
Ø3.5x16mm below the mark. The distance between the
holders is equivalent to 1/3 of the overall frame dimension.
B8:
Position again to the frame above the window aperture.
Fix the frame top left and right, each with a rounded-head
screw Ø3.5x16mm.
B9+B10:
Close the blackout system completely to define the lower
mounting points. Screw the support legs, each with a roun-
ded-head screw Ø3.5x16mm. Pay attention to the paralle-
lism of the guides to avoid jamming the handle bar.
US/GB
9/32