Operating Elements And Connections; Safety Notes; Installation - Monacor PA-102 Bedienungsanleitung

All operating elements and connections de -
GB
scribed can be found on the fold-out page 3.
1 Operating Elements
and Connections
1 Mounting brackets
2 Jack MIC (6.3 mm jack, unbal.) to connect the
microphone provided
3 Jacks AUX (RCA) to connect an audio unit with
line output (e. g. MP3 / CD player, radio, cassette
recorder)
4 Volume control MIC LEVEL for the microphone
connected
5 Button SIREN to activate the siren at maximum
volume
6 Volume control AUX LEVEL for a unit connected
to the jacks AUX (3)
7 POWER switch
8 Power LED ON
9 Plug-in screw terminal* 12 V for power supply
10 Plug-in screw terminal* SPEAKER OUTPUT to
connect a speaker (minimum impedance: 4 Ω)
11 Talk button
12 Microphone holder
13 Microphone plug for connection to the jack
MIC (2)
* To make handling easier when connecting, the screw ter-
minals can be removed from the plug connection.
6

2 Safety Notes

This unit corresponds to all relevant directives of
the EU and is therefore marked with
G
The unit is suitable for indoor use only. Protect it
against dripping water and splash water, high air
humidity and heat (admissible ambient tempera-
ture range: 0 – 40 °C).
G
For cleaning only use a dry, soft cloth; never use
water or chemicals.
G
No guarantee claims for the unit and no liability
for any resulting personal damage or material
damage will be accepted if the unit is used for
other purposes than originally intended, if it is not
correctly connected or operated, or if it is not
repaired in an expert way.
If the unit is to be put out of operation
definitively, take it to a local recycling plant
for a disposal which is not harmful to the
environment.
3 Applications
The amplifier PA-102 is specially designed for 12 V
operation. It is suitable both for making announce-
ment and for reproducing music. With a 4 Ω
speaker connected, the output power of the ampli-
fier is 15 W .
MAX

4 Installation

For installation, two brackets (1) are supplied. Fas-
ten these brackets to the sides of the housing
(fig. 1). For the microphone, a holder (12) is sup-
plied. Fasten the holder at a suitable place and put
the microphone into the holder when it is not in use
(e. g. during intervals).
.