Operation
Setting the Temperature
Before setting the temperature please consult the hints for care label on the
clothing. If there are no hints for care start at the lowest temperature and if
necessary increase the temperature until you achieve satisfactory results.
Here are some guidelines:
Temperature setting for nylon, acetate
Temperature setting for wool, silk and blends
Temperature setting for cotton and linen (steam)
Steam Ironing
Fill the iron with water as described above. Plug in the power plug and turn the
temperature control dial (F) to the desired temperature. The indicator light (E) will
come on immediately and turn off when the selected temperature is reached. As
soon as the iron is held horizontally and the adjustable steam lever (A) is set,
steam will flow out of the vents. The amount of steam can be adjusted with the
adjustable steam lever (A). Set the lever to the left for moderate steam and to the
right for full steam. All the way to the left the steam is turned off.
Always make sure that there is enough water in the water tank.
9