FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE
ERROR CODE
Wash/Dry
End
Start/Pause
ERROR
DESCRIPTION
Inadequate water
supply
Error of continuous
water input
The waste water in the
machine cannot be
discharged.
Intended water
temperature could not
be reached faulty
heater and heater
sensor
Alarm is active against
water overflow
Faulty electronic card
25
CONTROL
•
Make sure the water input tap is totally open and that
there is no water cut.
•
Close the water input tap, separate the water input
hose from the tap and clean the filter at the connection
end of the hose.
Restart your machine, contact the service if the error
•
resumes.
Close the tap.
•
Contact the service.
•
•
Water discharge hose is clogged.
The filters of your machine might be clogged.
•
•
Power off-on your machine and activate the program
cancellation command.
If the error continues, contact the service.
•
Contact the service.
Power off your machine and close the tap.
•
•
Contact the service.
Contact the service.