Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
Radio-controlled chime
General information
Before using the item for the first time, please read through these instructions carefully
and retain them for future reference. The bell push is splash-proof (IP44) and is not
suitable for heavy-duty use. The wireless bell is intended for installation in dry, indoor
environments (IP20).
Installation may only be carried out by a qualified electrician!
Scope of delivery
1 x bell push
1 x wireless bell
1 x battery (3V CR2032)
3 x wall plugs
3 x screws
1 x double-sided adhesive tape
1 x instruction manual
Product overview
Loudspeaker
LED indicator light
Melody
Pairing
Mode (sound, light)
Volume
Nameplate
Bell push
Notes
• The wireless chime is only designed for use with the appropriate batteries.
• This wireless chime set consists of a transmitter and a receiver.
• This wireless chime set offers you the possibility to set up a bell system without wiring.
• This set is not intended for integration into an existing bell system.
• The range between transmitter and receiver is maximum 100m in the open field. The radio signal
is transmitted through walls, walls, furniture and other obstacles, but depends on the structural
conditions - walls, especially reinforced concrete walls, heat-insulating glazing and ceilings lead to
a reduction in range.
• Shielding caused by metal parts can severely impair reception, so that the signal cannot be
transmitted. For this reason, never attach the transmitter to metal surfaces.
• If the product is not in use for a long period of time, remove the batteries.
• The product has no replaceable parts. Do not try to open or repair the product.
Specifications
Wireless bell type number:
Bell push type number:
Frequency:
Frequency band:
Max. transmission power:
Range (free field):
Volume:
Degree of protection:
Standby consumption:
Battery:
Temperature operating range: -20°C ~ 50°C
QH-863A
QH-I
433,92MHz
433,05 – 434,79MHz
<10mW
approx. 100m
85dB
Wireless bell: IP20 (only for use in dry indoor environments)
Bell push: IP44 (splash-proof)
0.5mA
Wireless bell: 3 x 1.5V AA (not included in delivery)
Bell push: 1 x 3V CR2032 (included in delivery)
9
Werbung
