Novoferm NovoSpeed Flex Montageanleitung Seite 11

4.21
GB
a
Half-open the door and centre the bottom beam.
4.22
Drill 4 holes in the door panel and position the industrial bolts as indicated.
18
a
4.23
Place the spring cover on the balance side in the column and secure with self-locking parkers.
Use the pre-drilled holes in the hood for this.
4.24
Place the hood in the column on the cable side of the column and tap it gently into place. This is best
done with a rubber mallet.
GB
19