Clearaudio Satisfy Kardan Bedienungsanleitung Seite 6

User manual / Bedienungsanleitung
Insure that the distance from the spindle to the pivot point of the tonearm is exactly 222 mm.
Moving the armboard in one direction or another will allow you to locate the correct position.
Once located, tighten the armboard down. Shown in the picture below. You can also use the optional
cartridge alignment gauge
Clearaudio
For the exact adjustments should be the cartridge mounted!
Pic. 4: Distance from pivot to stylus
VTA adjustments are accomplished by loosening the lock screw on the side of the armboard base
(shown in picture 5). Once loose, you can move the arm up or down to achieve the desired VTA.
Tighten the screw when finished. Re-check tracking force after adjusting VTA.
Please adjust the tonearm tube parallel to the turntable chassis!
Pic. 5: VTA-adjustment
6
(Art. No.: AC005/IEC www.analogshop.de
© clearaudio electronic GmbH, 2017/02
).