Omni Bead Ruptor 24 Elite Benutzerhandbuch Seite 5

1.
3.
5.
Lock
Move the locking switch to the
"Lock" position.
CAUTION: DO NOT run
without moving the switch to
the "Lock" position.
Loading Sample Tubes
Unlock
2.
*
A minimum of four tubes are required
and must be spaced evenly*.
4.
Screw down to secure tubes.
6.
Close the lid until the locking handle
clicks into place.
CAUTION: The unit will not run
without the lid fully closed.
*