Omni Bead Ruptor 24 Elite Benutzerhandbuch Seite 3

Data herein has been verified and validated. It is believed adequate for the intended use of
the instrument. If the instrument or procedures are used for purposes over and above the
capabilities specified herein, confirmation of the validity and suitability should be obtained;
otherwise Omni International does not guarantee results and assumes no obligation or
liability. This publication is not a license to operate under, or a recommendation to infringe
upon, any process patents.
This product is warranted to be free from defects in material and workmanship for a period
of ONE YEAR from the date of delivery. Omni International will repair or replace and return
free of charge any part which is returned to its factory within said period, transportation
prepaid by user, and which is found upon inspection to have been defective in materials
or workmanship. This warranty does not include normal wear from use; it does not apply
to any instrument or parts which have been altered by anyone other than an employee
of Omni International nor to any instrument which has been damaged through accident,
negligence, failure to follow operating instructions, the use of electric currents or circuits
other than those specified on the plate affixed to the instrument, misuse, or abuse. Omni
International reserves the right to change, alter, modify, or improve any of its instruments
without any obligation whatever to make corresponding changes to any instrument
previously sold or shipped.
THE FORGOING OBLIGATION IS IN LIEU OF ALL OBLIGATIONS AND LIABILITIES INCLUDING
NEGLIGENCE AND ALL WARRANTIES OF MERCHANTABILITY OR OTHERWISE, EXPRESSED
OR IMPLIED IN FACT OR BY LAW, AND STATE OUR ENTIRE AND EXCLUSIVE LIABILITY
AND BUYERS EXCLUSIVE REMEDY FOR ANY CLAIM OF DAMAGES IN CONNECTION WITH
THE SALE OR FURNISHING OF GOODS OR PARTS, THEIR DESIGN, SUITABILITY FOR USE,
INSTALLATION, OR OPERATION. OMNI INTERNATIONAL WILL IN NO EVENT BE LIABLE FOR
ANY SPECIAL OR CONSEQUENTIAL DAMAGES WHATSOEVER, AND THEIR LIABILITY UNDER
NO CIRCUMSTANCES WILL EXCEED THE CONTRACT PRICE FOR THE GOODS FOR WHICH
LIABILITY IS CLAIMED.
This product has been engineered for safety; however, basic safety precautions and
common sense must always be demonstrated when using any electrical product.
- DO NOT attempt to modify any part of this product.
- DO NOT allow the machine to be submerged in any liquid.
- DO NOT use in any setting other than an indoor laboratory.
- DO NOT plug power cord into an incorrect outlet or subject it to an incorrect voltage.
- Use this product only for its intended purpose.
- DO NOT use attachments not recommended by the manufacturer.
- DO NOT operate the product if it is damaged in any way.
- Keep this product away from heated surfaces.
- DO NOT modify the plug or cord that is provided. If the plug will not fit the outlet, have
the proper outlet installed by a qualified electrician.
- DO NOT operate the product with the safety ground disconnected.
WARNING: Reduce the risk of unintentional starting; make sure the speed switch is in the
OFF position before plugging in the motor.
WARNING: Damaged or worn power cords should be repaired or replaced immediately by a
qualified electrician.
WARNING: Improper connection of the equipment can result in a risk of electric shock.