Description; General Notes; Areas Of Application; Features Of The Microsart E.jet - Sartorius Stedim Biotech Microsart e.jet Bedienungsanleitung

2.1 General notes

2.2 Areas of application

2.3 Features of the Microsart

2.4 Operating principles

Safety Notice
4 Description | General safety instructions

2 Description

– It is essential that you read these Operating Instructions before putting the
transfer pump into service. Follow them for all applications as they help prevent
dangerous situations and damage.
– The Microsart
for laboratory and industrial applications and distinguish in reliability and simple
operation.
Transfer of neutral and the most aggressive liquids in laboratories. Especially for
vacuum filtration in Micro biology sample preparation.
e.jet – They are self-priming and can operate dry.
®
– By using chemically resistant materials such as PTFE, ETFE, EPDM and PP for parts
that come into contact with the liquid, almost all neutral and aggressive liquids
can be handled. Chemical Compatibility is given for example for the following dis-
infectants: Ethanol, Isopropanol, Peracetic Acid and Hydrogen Peroxide.
– Due to the compact construction it very little working surface required.
– Maintenance free
The Microsart
An eccentric converts the rotary motion of the drive shaft into an oscillating move-
ment of a connecting rod, which in turn transmits its motion to the diaphragm.
In combination with inlet and outlet valves, this diaphragm motion provides the
pumping action.

3 General safety instructions

– Ensure that the pump is only used for its intended purpose.
– The unit may not be used in areas in which there is a danger of explosion.
– Only connect the pump into fused sockets.
– Observe all relevant safety and accident prevention regulations.
„Before working on the pump, disconnect it from the mains supply!"
– The parts of the equipment that contain live parts may only be opened by
qualified persons.
– The Operating Instructions should always be kept readily available and near to
the equipment.
– When cleaning the unit, make sure that no liquid enters the housing.
– Use only genuine spare parts from Sartorius.
If you return your Sartorius pump for repair, please state for what medium it has
been used for, especially if this is very aggres sive | dangerous.
If the pump has been used for dangerous or highly aggressive media, please
clean it before dispatch.
e.jet transfer pumps have been developed by Sartorius especially
®
® e.jet transfer pump is an oscillating positive displacement pump.