Operation - Velleman CAMSET15 Bedienungsanleitung

Fig. 6
c. Installing the Monitor Station
• Fasten the PCB onto the bracket.
• Connect the wire coming from the camera station to the
PCB (see "Wiring").
• Fix the bracket onto the wall using the included screws.
• Connect the wire from the monitor station to the PCB (see
"Wiring").
• Hang up the monitor station.
• Put the plug into the mains.

6. Operation

a. Communication with the Visitor
1.
2.
3.
4.
CAMSET15
A chime will be heard when the CALL button on the camera station is
pressed. The monitor on the monitor station will display the image.
Pick up the handset to communicate. If the handset is not picked up, the
indoor monitor will deactivate after 20 seconds.
Press the UNLOCK button to unlock the door.
Hang up the handset after communication.
6
Fig. 7
VELLEMAN