Herunterladen Diese Seite drucken

Blaupunkt HCS601 Bedienungsanleitung Seite 6

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 7
HCS601
1.
Lenght adjustment cup
2.
Blades
3.
On/off button
4.
Dial for distance setting
5.
Display
CHARGING THE APPLIANCE
If the appliance's battery charge is low or the battery is totally discharged, it needs charging. Insert the
power supply cord into the appliance and connect the power supply unit to the electrical grid.
The charging indicator of the appliance will then display its charging status. If the appliance is totally
discharged, the indication of its charging status may be delayed. This delay should be no longer than 2
minutes.
Having connected the appliance to the charger, you may continue using the appliance. However, do
not use the appliance in the vicinity of baths, showers, swimming pools or similar water tanks.
HAIR CLIPPER OPERATION
The dial regulates the comb length between 3-22mm.
Switch the shaver on with the On/Off button. Slowly move the appliance over the hair. It is
recommended to shave "against the grain", against the direction of the hair growth.
Note: Make sure you remove any excess cut hair from the limit comb.
Having finished clipping, remove all hair from the trimming head.
HAIR CLIPPER CLEANING
Prior to cleaning the appliance, ensure that it is switched off and not being charged.
Clean the limit combs under running water.
Remove the limit comb of the trimmer. Remove the trimming head by pressing down gently on the
blades. Clean the parts under running water.
It is recommended that a little machine oil is applied onto the cleaned blades.
DISPLAY
When using: the white battery symbol will appear.
When accumulative time reaches 30minutes, the water-tap symbol will appear for cleaning reminder.
When charging: the red plug symbol will appear.
When finish charging: the white battery symbol will appear instead of the red plug symbol.
When battery capacity becomes low and using time is left 3-5 minutes: the red plug symbol will blink
for gentle warning.
The dial regulates the comb length and show the figures on the black screen.
6.
Charging socket
7.
Cleaning brush
8.
Comb
9.
Adaptor
10.
Machine oil for blades
4

Werbung

loading