Basic Operation Playback; Selecting The Input Source - Yamaha YSP-600 Bedienungsanleitung

PLAYBACK

Selecting the input source

You can play back sound from the components connected
to this unit simply by pressing INPUT on the front panel
repeatedly or pressing one of the input selector buttons
(STB, VCR, DVD, AUX, or TV) on the remote control.
The name of the selected input source and the type of
corresponding input mode appear in the front panel
display.
INPUT VOLUME STANDBY/ON
STB
INPUT1
TV
AUTO
VOL MODE SETUP
5BEAM
1
STEREO
4
7
0
CH LEVEL
TEST
42
En
VCR DVD AUX
TV
INPUT2 MACRO
INPUTMODE SLEEP
ST+3BEAM 3BEAM
2 3
MY BEAM
MY SUR.
5 6
8 9
SUR. DECODE
+10
MENU
TV/AV
ENTER
YSP
RETURN
Playback
■ Front panel operations
Press INPUT on the front panel repeatedly to
toggle between TV/STB, VCR, DVD, and AUX.
The name of the corresponding input source and the type
of current input mode are displayed in the front panel
display.
■ Remote control operations
y
In addition to controlling this unit, you can also operate other AV
components if you set up the remote control with the appropriate
remote control codes and set the operation mode selector to TV/
AV to change the control area (see page 76).
Press TV to play back a TV program.
Name of the selected
input source
Press STB to play back a satellite broadcast.
Press DVD to play back a DVD.
TV
Type of the selected
input mode
STB
DVD