Cleaning; Inactive Periods; Replacement Parts; Location Of Model Number And Serial Number - Barnant Company PONNDORF PX102 Bedienungsanleitung

Cleaning

When pumping materials that are likely to leave deposits, rinse the hose after use.
When changing the hose, clean any contamination from the pump casing.

Inactive Periods

If the pump is not going to be used for periods longer than five (5) days, the hose must be removed to prevent
permanent deformation caused by continuous pressure from the rollers and hardening of the hose.

Replacement Parts

Replacement parts may be obtained through your local dealer or from the Manufacturer or Dealer on the front of this
manual.
Detailed parts information is available in the REPLACEMENT PARTS manual number A-1299-0863, which is supplied.

Location of Model Number and Serial Number

PX, PD, PDX
10, 15, 19, 27, 30, 35, 50 = model size, inner diameter of the hose
Example:
These marks, as well as the pump serial number, are embossed on the nameplate. The pump number can also
be found at the base of the pump casing.
CAUTION: When selecting the method of lifting, the means of fixing and carrying the pump must be taken
into account. Pay attention to the maximum weight limit of the lifting gear.

Transit Storage

The pump must be stored in an environment free of moisture.
CAUTION: When storing the pump for extended periods (longer than five (5) days), remove the hose to
prevent permanent deformation from the rollers.
= model series
Hose pump type PX 10

TRANSPORT AND STORAGE

11