WEBTEC CT15 Bedienungsanleitung Seite 3

Introduction
The CT turbine flow meter family with conditioned output provides a complete solution to the flow measurement of
hydraulic systems on test stands, machine tools and other fixed or mobile applications. The flow meter can be installed
anywhere in the hydraulic circuit for production testing, commissioning, development testing and analysis of control
systems. The compact design allows the CT series flow meters to be installed where space is limited.
The CT turbine flow meter has a built-in microcontroller that conditions the signal from the flow meter to provide an
accurate analogue output. This enables you to connect the flow meter directly into your digital display, PLC or custom
DAQ system without having to worry about complex calibration factors or lookup tables. Four main versions are available
offering 4 - 20 mA current loop, 0 - 5 V, 0 - 3 V (Sensor Recognition) or Pulse* output. The CT flow meter is the ideal tool
for monitoring the performance of pumps, motors, valves and hydrostatic transmissions.
The CT range of products can be divided into two families:
1. Standard CT
2. CTR, a flow turbine with a built in load valve
This manual covers the standard CT range of products.
Before first operating the equipment read the whole of these instructions. Safety may be impaired if they are not followed.
Webtec have been designing and manufacturing flow meters and hydraulics components for over 40 years. We operate
within a Quality Management System that complies with the requirements of BS EN ISO 9001 which is externally audited
and certificated each year. Beyond compliance to the standard, Webtec is committed to continually improving in
everything we do; with particular emphasis on understanding what matters to our customers and suppliers, and designing
our systems and work to meet their needs. We are always keen to hear from customer who may have special
requirements not covered by our standard ranges.
1