Technical Data; What To Do If - Becker Centronic SunWindControl SWC241-II Montage- Und Betriebsanleitung
Handsender für wind-steuerung
Vorschau ausblenden
Andere Handbücher für Centronic SunWindControl SWC241-II:
- Montage- und betriebsanleitung (52 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Assembly and Operating Instructions
Nominal voltage
Type of battery
Protection class
Permissible surrounding temperature
Radio frequency
Problem
Drive is not functioning.
The system does not
extended manually.
18
Technical data
What to do if ...?
Cause
1. Battery is flat.
2. Battery is inserted
incorrectly.
3. Receiver outside the
radio range.
4. Transmitter is not
programmed in the
receiver.
Wind speed exceeds
threshold value.
3 V DC
CR 2430
IP 20
-10 to +55 °C
868.3 MHz
Remedy
1. Insert new battery.
2. Insert battery cor-
rectly.
3. Reduce distance to
the receiver.
4. Programme transmit-
ter.
Wait until wind abates.
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
