Herunterladen Inhalt Inhalt Diese Seite drucken

Master Module - Polytron PolyFlex DPM 800 Bedienungsanleitung

Kopfstelle
Inhaltsverzeichnis

Werbung

4.2.2 Master Module

DPM-PS und DPM-PT
Bild 13
Programmierfenster Master-Modul
1. TV oder Messgerät am Ausgang anschließen,
einschalten und Kanal 69 einstellen.
2. Basisgerät einschalten.
3. Den SETUP-Schalter des zu programmierenden
Moduls
nach oben auf SETUP schalten (LED
rot).
4. Am Monitor erscheint das oben angezeigte Pro-
grammierfenster mit Angabe von Modultyp,
Software-Version und Servicekanal.
Hinweis: Das jeweils einzustellende Feld ist far-
big markiert.
5. Die Taste OK der Fernbedienung drücken, das
Feld Input Settings ist markiert. Hier können alle
Eingangsparameter eingestellt werden.
6. Drücken der Taste OK, das Feld Frequency ist
markiert:
Jetzt die Frequenz des gewünschten Transpon-
ders eingeben.
7. Mit der Taste CH▼ auf LNB LO Freq und da-
nach auf Symbol Rate springen und die jeweili-
gen Werte einstellen.
8. Danach auf Search springen und die Taste OK
drücken. Es startet der automatische Suchlauf
und listet alle gefundenen TV- und Radio-
Programme in einem neuen Fenster (Bild 14) auf.
16
4.2.2 Master Module
DPM-PS und DPM-PT
Figure 13 Programming window Master-Module
1. Connect the TV or measuring instrument at the
output, turn it on and adjust channel 69.
2. Turn on base unit.
3
Turn the switch of the module to be programmed
up to position SETUP (LED lights red).
4. The above indicated programming window ap-
pears indicating Module Type, Software Ver-
sion and Service Channel at the monitor.
Note: The field to be programmed is highlighted.
5. Press the button OK of the remote control, the
field Input Settings is highlighted. In this menu,
all input parameters can be modified.
6. Press the button OK, the field Frequency is high-
lighted:
Now enter the frequency of the desired tran-
sponder.
7. Jump with the key CH▼ on LNB LO Freq and af-
terwards on Symbol Rate and set the respective
values.
8. Jump on Search and press the button OK. The
automatic scanning starts and lists all found
TV- and radio programs in a new window
(Figure 14).
Beschreibung Screen Type - Seite 24
Description Screen Type – Page 24

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis