Date And Time Setting; Datalogger Setup - Velleman DEM105 Bedienungsanleitung

9.3 Date and Time Setting

1. Left-click on the date and time setting
icon to open the interface.
2. Set the desired date and time, and
press [OK] to confirm.
Remarks:
 (Re)setting date and time will delete all
saved data. It is advised to previously
back up data.

9.4 Datalogger Setup

1. Left-click on the datalogger setup icon to open the interface.
2. Set all parameters as desired and press [OK] to confirm.
Channel
Please leave this setting as 2 as the data logger will log the humidity
and the temperature.
Sample(Sec)
Select your logging interval from 1 second to 24 hours.
V. 02 – 17/09/2015
DEM105
7 ©Velleman nv