Convection Air Slide Valve; Wood Storage Compartment; Fire Grate; Heating - Olsberg Tolima PowerSystem II Compact Anleitung

Convection air slide valve

Operating lever for the convection air
The operating lever for the convection air is up above
to the right on the back wall of the stove.
Operating lever setting:

Fire grate

„II" ...Slide valve completely open
„I" ....Slide valve 1/2 open
„0" ...Slide valve closed
● If you want the room where the stove is installed to
warm quickly, set the lever to „II".
● If you want to store the heat, set the lever to „0".
Operating lever for the fire grate
be opened or closed to move the ash from the com-
grate back and forth.
● Primary air can only enter the combustion chamber
18
● With the help of the operating lever the fire grate can
bustion chamber to the ash pan by pushing the fire
if the fire grate is set on open position.

Wood storage compartment

Heating

The wood storage compartment below the combus-
sure. It can be opened by lightly pressing on the but-
ton (Olsberg logo). Likewise it can be closed by light-
ly pressing.
● Only place the quantity of fuel required to achieve
the heating requirement.
For a nominal heating output 6 kW:
- max. 1,5 kg billet wood; burning time >45 min
- max. 1,3 kg wood briquettes; burning time >45 min
For max. heat output allowed:
- max. 3 kg billet wood
- max. 3 kg wood briquettes
● Open the combustion chamber door slowly for add-
ing new fuel, as otherwise the combustion gases can
escape.
● Empty the ash pan or combustion chamber in good
time. Otherwise it is possible for the combustion air
intake to be blocked or for the grate to be damaged.
● Only remove the ash pan to empty it.
● Clean the ash pan compartment regularly after re-
moving the ash pan to remove any ash that may
have been spilled (e.g. use a vacuum cleaner).
Attention:
Any stove and ash residues must have been left to
cool before being removed.
tion chamber is fitted with a magnetic pressure clo-
press here