Herunterladen Diese Seite drucken

Sissel Heating pillow Gebrauchsanweisung Seite 5

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Switching on:
Please always ensure that the SISSEL
in use.
The appliance may only be used with 230 Volts a.c.
Switch on the SISSEL
When switch on it has a 3 times beep –beep –beep sound to ensure the user has operated
switch correctly.
Setting 0 = appliance off
Setting 1 = minimum warmth
3 colors LED:
 Yellow/Green light indicates warming up.
 Red light is a warning light: disconnect the SISSEL
immediately!
Quick heating:
®
The SISSEL
heating pillow has a quick heating function that users can feel
the warmth within 7-10 minutes when turn on the switch at highest setting.
Timer function:
Now you can experience the pleasant warmth. After about 90 minutes the
®
SISSEL
heating pillow silently switches off automatically. In order to put the
heating pillow into operation again you must first set the switch to positon '0'.
After about 5 seconds you can switch on the SISSEL
Caution:
The electronic components inside the switch may lead to a slight warming of the switch
when the SISSEL
on top of the SISSEL
You should not rely on using your hands to gauge the SISSEL
because they are much less sensitive to heat than the surface of the rest of the human
body. A temperature, which may feel tepid to your hand, may feel unpleasantly hot on your
body.
Cleaning and care:
Please follow below symbols as indicated on the washing label.
AG 02 V2
®
heating pillow using the hand-operated switch.
®
heating pillow is on. Therefore the switch must not be covered or placed
®
heating pillow when it is in operation.
®
heating pillow is not bundled or folded when it is
Setting 2-3 = moderate warmth
Setting 4 = maximum warmth
®
heating pillow again.
®
heating pillow from power
®
heating pillow temperature
5/20

Werbung

loading