pebble audio AMP Handbuch: Erste Schritte Seite 7

AMP Receiver
How to switch AMP Receiver's power off
and on
AMP Receiver can be powered off and on by pushing the ON - OFF
Button until the LED Indicator blinks three times. If you push this botton
continuously, AMP Receiver will change the power status from power
off to power on and back blinking the indicator each time.
Button is pushed
For further information about troubleshooting Pebble Audio's
products in typical applications, see the documents delivered
with the original product containing the RCA (or USB) Transmitter.
AMP Receiver Troubleshooting
Symptom
AMP Receiver's LED indicator
light is continuously switched on
and off with a couple of seconds
interval.
LED indicator
ON - OFF 24V DC
ON - OFF Button
Receiver goes from power off to power on
Receiver goes from power on to power off
Possible Cause
Amplifiers outputs have
a short circuit
ENGLISH
Action
Check loudspeaker outputs
and cabel connections
7