pebble audio AMP Handbuch: Erste Schritte Seite 5

AMP Receiver
Building up connection between
RCA Transmitter and AMP Receiver
The procedure is as follows:
Keep the transmitter and receiver relatively close to each other
but not closer than 1.5 meters. This ensures that the connection
procedure can be carried out when radio signal levels are strong.
Do no touch the antennas during this procedure.
Connect power to RCA (or USB) Transmitter.
Using the small metallic tool for connection building, push the
button in the RCA (or USB) Transmitter:
Then the transmitter starts to look for a receiver showing a
blinking orange light for 120 seconds:
1s 1s 1s 1s 1s 1s 1s 1s 1s 1s
Connect power supply to the AMP Receiver and the LED
is lighted for 120 seconds to indicate period during which you can
build connections using the specific button in the front plate.
During this initial connecting period, the unconnected AMP Receiver
can be connected to an RCA (or a USB) Transmitter simply by by pushing
the button for building connections in the front plate using the tool
provided with this product.
Button for building connections
Front Plate RCA Transmitter
Connection building mode (120 seconds)
Button for building connections
Lighted during the first 120 seconds
ON - OFF
Front Plate AMP Receiver
24V DC
ENGLISH 5