pebble audio AMP Handbuch: Erste Schritte Seite 6

6
After this procedure, connection has been created to the
AMP Receiver.
After connection has been successfully created, both RCA (or USB)
Transmitter and AMP Receiver immediately show continuous orange
light from their indicator LEDs:
Transmitter LED:
Receiver LED:
Interpretation of the LED signal for AMP Receiver:
3 s 3 s
During normal operation both transmitter and receiver show
continuous orange light.
In case the RCA (or USB) Transmitter is active but it cannot find
the AMP Receiver, RCA (or USB) Transmitter's indicator blinks.
In case the AMP Receiver is active but it cannot find
the RCA (or USB) Transmitter, AMP Receiver's indicator blinks once
in 3 seconds.
For further information about mounting Pebble Audio's
products for optimal performance, see the documents delivered
with the original product containing the RCA (or USB) Transmitter.
Connection building has succeeded and
both units are in active mode i.e. transmitting
and receiving audio
Power is off or no power supply is connected
In active mode receiving audio
No connection i.e no transmitter detected
3 s 3 s
AMP Receiver