Cleaning And Maintenance; Technical Specifications - Perel Tools GARH15 Bedienungsanleitung

5. Use
• Pull the hose until the desired length is reached and hold. Slightly pull the hose until you hear a clicking sound.
The locking mechanism will now lock the hose.
• If you need more hose length, simply pull the hose to the desired length; hold the hose and pull slightly to lock.
• To rewind the hose, pull the hose for about 40cm until the clicking sounds disappear. Slightly release the hose so
the auto-rewind mechanism pulls the hose.
• Do not force the device when rewinding the hose. Make sure the hose is neatly rewound onto the reel to avoid
damage or malfunction.
REMARKS: Do not let go of the cable when rewinding but feed it through your hand until the cable has been
retracted entirely. If not, the speed of the auto rewind function may cause the cable to flop around and
cause bodily injuries and/or damage to surrounding objects.
Close the tap before rewinding the hose!

6. Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports.
3. Moving mechanic parts must not show any signs of wear and tear.
4. Wipe the device regularly with a moist, lint-free cloth and some diluted detergent. Do not use alcohol or solvents.
5. Store or mount the device in a dry and sheltered location, away from water and humidity.

7. Technical Specifications

Hose Material
Input Hose
Output House
Max. Pressure
Dimensions
Weight
For more info concerning this product, please visit our website www.perel.eu.
The information in this manual is subject to change without prior notice.
GARH15
PVC mesh
Ø12.7mm x 2m
Ø12.7mm x 15m
1.0MPa / 150 psi / 10 bar
430 x 410 x 225mm
7.5kg
3
PEREL