English; Ec Declaration Of Conformity; Intended Use; Safety Instructions - Black & Decker KG900 Anleitung

E N G L I S H
ANGLE GRINDER KG900/KG915
CONGRATULATIONS!
You have chosen a Black & Decker tool. Our aim is
to provide quality tools at an affordable price.
We hope that you will enjoy using this tool for
many years.

EC DECLARATION OF CONFORMITY

KG900/KG915
Black & Decker declares that these
products conform to:
98/37/EC, 89/336/EEC, 73/23/EEC,
EN 50144, EN 55014, EN 61000
Level of sound pressure, measured according to
EN 50144:
L (sound pressure)
pA
L (acoustic power)
WA
Always wear ear protection if the sound
pressure exceeds 85 dB(A).
Hand/arm weighted vibration value according to
EN 50144:
Kevin Hewitt
Director of Consumer Engineering
Spennymoor, County Durham DL16 6JG,
United Kingdom
6
dB(A) 89.9
dB(A) 102.9
2
< 2.5 m/s

INTENDED USE

Your Black & Decker angle grinder has been
designed for cutting metal and masonry using the
appropriate type of cutting or grinding disc.
It is also suitable for sanding using a backing pad
and sanding disc.
This tool is intended for consumer use only.

SAFETY INSTRUCTIONS

Warning symbols
The following symbols are used in this manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of
non-observance of the instructions in this
manual.
Denotes risk of electric shock.
Read the manual prior to operation.
Fire hazard.
Know your tool
Warning! When using mains-powered
x
tools, basic safety precautions,
including the following, should always
be followed to reduce the risk of fire,
electric shock, personal injury and
material damage.
Read all of this manual carefully before
x
operating the tool.
Before operating the tool, make sure
x
that you know how to switch the tool off
in an emergency.
Retain this manual for future reference.
x