Sterilization Instructions - Nüby 1564 Bedienungsanleitung

6. Once heating is complete, allow warmer time to cool down. Remove the bottle and shake well (about 10 seconds*) to distribute heat
evenly. If the bottle is not warm enough, add more water and reheat as necessary. Always test the temperature of the liquid first, before
feeding it to baby.
7. Allow unit to cool for at least 10 minutes between uses.
8. *Note: If bottle was frozen, shake for a longer time if necessary.
FOOD WARMING INSTRUCTIONS
1. When ready to begin, insert plug into wall outlet. Preheating is not necessary.
2
2. ADD the amount of
water as advised by the
chart (pg. 52) for intended
size of the food jar. Pour
the water directly into the
warming basin.
WARNING: Beware of hot steam from the warming basin; do not put your hands or face in or around the warming basin during or immedi-
ately after warming.
- Once heating is complete, remove the food jar or container and stir well (about 10 seconds*) to distribute heat evenly. If food is not warm
enough, add more water and reheat as necessary. Always test the temperature of the food first, before feeding it to baby. Allow unit to
cool for at least 10 minutes between uses. *Note: If food was frozen, stir for longer time if necessary.

STERILIZATION INSTRUCTIONS

1. When ready to begin, insert plug into wall outlet.
2
2. Pour 45 ml of water
directly into the warming
basin.
6. Press the POWER button to turn your unit ON. The sterilization process will begin automatically. The unit will turn off once water runs out.
7. When sterilizing is complete, remove the lid carefully by the handle. LID WILL BE VERY HOT. Keep hands and face away from unit when
opening lid. Allow unit to cool for at least 10 minutes between uses.
*Note: The lid may not completely close when sterilizing taller bottles, however, sterilization will still occur inside bottle. Keep hands and
face away from lid opening as steam will be very HOT.
STERILIZATION instructions for Pacifiers and Small Accessories
The basket also allows pacifiers and small accessories (like bottle nipples and rings) to be disinfected quickly and easily. Pacifiers or small items
can be placed in the basket to disinfect. The basket must be in the chamber with the lid on for the disinfecting process to work properly.
• Please note- only items that are able to withstand the heat of steam sterilization (as instructed by individual item's washing instructions) can be
used with this feature.
• Item must be small enough so that it is completely contained within the lift-out Basket. Do not use with items that extend through the bas-
kets's open areas, into the warming basin. The sterilizing lid must be completely in place.
• Before placing item into basket, remove all foreign material from item with soapy water. Rinse thoroughly. This must be done before any
disinfection process so the foreign material will not prevent disinfection.
• Please note- preheating is not necessary or recommended.
20 - PICNV 1564
3
3. Remove lid from food
jar or container. Place the
frozen, refrigerated, or
room temperature food
jar into the lift-out basket.
Always use this basket to
prevent damage to food
containers.
3a
3a. Disassemble nipple
from screw ring. Place
nipple into the lift-out
basket first.
4
4. Place the adapter ring
on top of the warmer.
Do not lose this ring as
the food will not warm
properly without it. Do not
use unit lid.
3b
3b. Lightly place the screw
ring in the lift-out basket
over the nipple.
5
5. Press down the POWER
button to turn your
warmer ON. The button
will light up ORANGE.
4
4. Place bottle base upside
down in the basket on top
of the screw ring and nipple.
Always use this basket to
prevent damage to bottles,
nipples, etc.
6
6. The size of the food jar
or container, and how
much water is used will
determine the time it
takes to warm the food.
The unit will shut off
when the water runs out.
5
5. Place the lid* on top.
Only use the lid for
sterilizing.