auna Moving 80 Bedienungsanleitung Seite 24

EN
24
BT OPERATION
Pairing
1. Turn on your BT device.
2. Turn on the speaker BT. the unit will automatically go into pairing mode
to search for BT device. You will know you are in pairing mode when the
LED is flashing.
3. If your BT device is not able to pair to the unit, disconnect the unit's BT to
break the previous BT connections and reset the BT module.
4. Navigate to your BT device's setup screen, find Moving80-Moving120
and connect.
5. BT indicator light will light up solid when in connecting.F lashes twice
when pause playback,flashes when ready for pariing.
6. To disconnect pairing, hold PLAY /PA USE button.
Note: You can connect with a smart phones or tablet PC with BT.
BATTERY
1. The unit is a battery powered loudspeaker. Be sure that you have
completely charged the battery prior to first use to maximize the
battery's lifespan. The unit takes approximately 8 hours to fully charge.
The unit will automatically begin charging once the power cord is
connected to a power source and Power button is set to AC.
The unit will also power on when connected to a power source even if
the battery power is low.
When connected to a power source, the unit will play while also
charging the battery.
When the battery is full, the full charging indicator light on front panel
will ON.t
2. Upon completion of the charging, Please disconnect the power cable .
3. If all green battery indicator turned off and only the red low LED lights
up, please power off the unit and begin charging the battery.
4. With standard usage, a fully charged battery can play for about 4- 5
hours.
5. Battery can be recharged about 300 times in its life time.
6. When not in use, the speaker should always be set fo OFF to prevent the
unit from draining the battery.
7. When the unit is not used for prolonged periods of time, the battery will
gradually lose its power. It is recommended to fully charge the battery at
least every 60 days.