Installing The Turntable; Kitchen Counter - EGG MTD 204 S Bedienungsanleitung

INSTALLING THE TURNTABLE

Charge (bottom side)
Turntable
Support axis
Assembled support
INSTALLATION
Remove all packaging material and take out all accessories.
Make sure the oven is not damaged in any way (dented or damaged door etc.). Do not install the
microwave oven if damaged.

Kitchen counter

Oven body: Remove all protective foil from the oven surface.
Do not remove the light brown foil, screwed to the inside of the oven. This foil protects the
oven magnetron.
Installation
1. Place the oven on a flat surface with a sufficient amount of space around the appliance to ensure
the proper function of exhaust vents
The minimum distance between the oven and the closest wall must be 7.5 cm.
At least one side must be open space.
a) Leave at east 30 cm of free space above the oven.
b) Do not remove oven legs.
c) Do not block exhaust vents. Blocking the exhaust vents could cause damage.
d) Place the oven as far away from the radio or television as possible.
The microwave oven can interfere with the television and radio signal.
45
1. Do not lay the turntable face down. The turntable
must always rotate freely.
2. Do not use the oven without the support and
turntable.
3. All food and containers must always be placed on the
turntable.
4. Contact your nearest authorized service if the
turntable cracks or the support is damaged.
30 cm
7.5 cm
Opening
7.5 cm
EN