De Dietrich AD251 Montageanleitung Seite 7

3 Test radio reception
4 Install the sensor using the screws and dowels provided
19/03/2009 - 300020521-001-A
3
Reception problems may occur, depending on the
construction materials used in the house (thickness of
walls or floors, type of materials used).
When the position of the outside temperature sensor has been
decided upon, carry out a test to ascertain whether radio reception
between the sensor and the boiler module is adequate:
2
1. Check that the boiler is switched on.
2. Postion in the place selected to install the sensor. Press the
button on the outside temperature sensor.
3. Check that the light on the boiler's radio module flashes every 3
seconds. Otherwise, reception is not good. Select another place
for the sensor and carry out the test a second time.
4. To exit this mode, press the button on the outside temperature
sensor. The mode is exited automatically after 5 minutes.
C002450-A
AD251
7