Inno home SA101 Gebrauchsanleitung Seite 11

If the Stove Alarm signals during normal cooking, press
the push-button during the first minute pre-alarm signal
( ). This tells the Stove Alarm to adjust its sensitivity (see
adjustment period below).
Note do not reset the pre-alarm signal unless the Stove Alarm sig-
nals in a normal cooking situation.
If the Stove Alarm (
The alarm signal stops when the temperature starts to fall. You
can also stop the alarm signal by pressing the push-button
once.
Signalling during normal cooking – adjustment period
When the Stove Alarm is newly installed, it will first go
through an adjustment period, during which it learns the
user(s)'s way of cooking and the installation environment,
adjusting its sensitivity accordingly. During this time, some
false alarms may be triggered, until the Stove Alarm's indi-
vidual settings are ready.
The Stove Alarm may interpret placing a hot oven tray on
the cooker or removing a pot from a hot hotplate as a haz-
ardous situation and signal a short alarm.
STOVE ALARM SA101 USER MANUAL
) signals, turn the hob off.
3