Herunterladen Inhalt Inhalt Diese Seite drucken

Installing Battery; Environment Protection - Exotek Instruments Mc-380Xca Anleitung

Vorschau ausblenden Andere Handbücher für MC-380XCA:
Inhaltsverzeichnis
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 20
PIN-FREE MOISTURE METERS
MANUAL
SENSOR SWITCHING
By pressing the L/S key once, a L-sign is indicated on the display. Wait
until the
-sign is shown. During the
be pressed again. Now the previous selected sensor top (
bottom (
pressed again, the device toggels to the other sensor.
Upper Sensor Indication

INSTALLING BATTERY

Open the battery lid on the backside of the meter.
Install a 9 volt L6R.
Close the lid.
A low voltage is indicated with
display when the battery needs to be replaced. A new battery should be
inserted to achieve correct measuring results.

ENVIRONMENT PROTECTION

According to the regulations for battery dispose, all
batteries must be returned to the trade or to battery col-
lecting points. You are not allowed to dispose batteries
through the household waste.
ONLY FOR EU COUNTRIES
Do not dispose of electrical tools together with house-
hold waste material! In observance of European Direc-
tive 00/96/ EC on waste electrical and electronic
equipment and its implementation in accordance with
national law, electric tools that have reach the end of
their life must be collected separately and returned to an
environmentally recycling facility.
SELECTION OF WOOD GROUPS OR BUILD-
ING MATERIAL GROUPS
After the unit has been switched on, the previous selected
sensor (top sensor with
(
) followed by the wood density 00-1180 kg/m3,
or building material CC-b30 is indicated on the Display. If
this key is kept pressed, the group increases by itself automatically while
increasing the velocity, as longer it is kept pressed. Or after releasing
and pressing the key E repetitively, the wood group will increase by
0kg/m³ or the next Material group is selected. After  sec. the unit is
ready to take measurements. The indicated wood group is equivalent to
the density of the timber.
MC-380XCA
) is indicated. If during this display, this button is
-sign indication, the key has to
Lower Sensor Indication
to the left; upper side on the
or bottom sensor with
- 5 -
) or
ENG
Inhaltsverzeichnis
loading

Inhaltsverzeichnis