Speed Adjustment - ECOLAB RotorsprayintegraPLUS Bedienungsanleitung

5.2.1

Speed adjustment

Fig. 5.3
Fig. 5.4
The signal "Speed OK" is active as soon as the nominal speed is reached after the start-
up period. A PLC output is generally used for the start function.
The signal is one-active!
417101448_RotorsprayIntegra.doc
Twist protection (optional)
Block diagram control board:
The cap at the connection end can be rotated
and has 10 lock-in positions.
Thus the rotor spray speed is pre-selected be-
tween 4000 and 9000 rpm in increments of 500
rpm. Scanning of the speed set point is optical.
A protective cap can be used to prevent uninten-
tional turning. (see accessories)
- 26 -
LANG APPARATEBAU
An ECOLAB Company
Rev: 3-08/07