Install Water Tank Module - Amibot SPIRIT Benutzerhandbuch

Product Operation

Install Water Tank Module

(Water tank is a optional part for this robot, so some of the models may not include this module.)
Do not use robot that installed water module on the carpet. Fold the edge of the carpet
before use.
Add water to the water tank if water runs out.
Water tank module must be removed before charging.
Add Water
Open the injection hole lid, slowly pour in
clean water.
Install Water Tank Module
Take out the dust bin from robot, and install
water tank on the back of robot.
18
Stick the cleaning Mop
Seal the lid carefully, stick the cleaning mop
on the bottom of the water tank, and buckle
up each side.
Start Mopping
Press CLEAN button on the robot or CLEAN
button on remote control to start robot.