bml Safe HomeSet Bedienungsanleitung Seite 6

Pairing Further Sensors (Detectors) and Alarm Settings
1) You can add up to 64 wireless alarm detectors to a camera (see package contents). All these devices must
first be paired with the camera before normal use. Therefore, to set a magnetic sensor to a door, click on
the gear icon (settings) as the first paired device, then select the „Add sensors" menu and press the „+"
button in the „Sensor" option and confirm. As the IP camera starts searching for the device (sensor), press
the button to activate the sensor or detector, or activate the device in other ways (such as by separating the
magnetic sensors from each another or moving with them). There must be a charged battery in the sensor
(detector). The camera records the activity of the sensor and saves it under its channel's number. You can
rename the saved channel to your liking (eg. garage). Follow the same procedure with any other detectors
(motion sensors with a range up to 10 m, smoke sensors, etc ...). We recommend checking the condition of
all the detectors' batteries routinely.
2) The settings for the alarm are to be found below the gear icon under „Alarm settings" and you can choose
whether to be informed about the alarm via the app or by email, the length of the audible alarm and
suchlike. It is possible to set a silent alarm (i.e. the camera does not sound an alarm but only informs you of
any suspicious movement). Set the silent alarm by selecting „Buzzer" which is found in the „Close" menu.
Recording
Insert the MicroSD card only when the camera is disconnected from the power supply. The camera norma-
lly supports 8-32 GB capacities. Cards bigger than 32 GB must first be formatted on a computer using the
FAT32 file system, up to a maximum of 128 GB. Different recording options can be set in „Video recording
settings" (manual non-stop recording, recording only in the event of an alarm, recording during a specified
time period).
- 6 -