bml Safe HomeSet Bedienungsanleitung Seite 3

3) Name the camera, enter the code (password) „123456" (basic factory setting code) and save. We re-
commend changing the password to something more complex. The camera will be online, just click on
the image for a live preview.
Troubleshooting: If you cannot pair your camera to your mobile phone, try the following steps. First of all,
make sure you're connected to the Wi-Fi network that the camera is connected to. If so, try restarting the
mobile app. If you are still unable to connect, uninstall the application, restart your mobile phone, and re-
install the camera as directed. The installation needs to take place within 5m from the Wi-Fi. The most com-
mon difficulties are: a wrong Wi-Fi setup (a poorly configured Wi-Fi router, or interference from neighbouring
networks), incompatible mobile devices, or a poor Wi-Fi signal.
Live Transmission and Setup
1) Click on the front of the camera preview to begin. With automatically rotating IP cameras, you can quickly
finger through the mobile device's display, scroll through the camera application to suit your needs, and
store up to 5 memorised locations which you'd like the camera to remember (to aid swifter movement
between the selected positions). This setting is located in the second section of the Live View Icons. Place
the camera in the initial location you would like to see and save the position by holding down the first icon.
The camera stores this position to its memory. Repeat the procedure for any other positions. Then you can
quickly and conveniently switch views based on the stored memory positions. The heads of automatica-
lly rotating cameras should never be rotated manually! Any warranty becomes invalid if mechanical
damage has been caused by physical rotation.
2) In live view mode, you can click on each icon to record a video (after inserting the MicroSD card into the IP
camera), take pictures, talk through the camera by holding the microphone icon, start a motion detection
- 3 -