Self-Tests - Siemens BT 200 Betriebsanleitung

BT 200

7.3 Self-Tests

The BT 200 performs self-tests automatically
and on request (hardware test).
Internal RS 485 driver test
-
The test is performed each time the stati-
on and branch test is called.
RAM test
-
A cyclic RAM test is performed.
Flash EPROM test
-
A cyclic EPROM test is performed.
RS 485 driver test
-
The individual tests (e.g., RAM test, flash
EPROM test and display key test) can also be
selected in specialist mode via service menu -
HW test.
If an error is detected during the self-test, you
must proceed as shown in the error correc-
tion table.
(S)J31069-D0075-U001-A2-6318
04/00 English
Page 25