Selecting Stations; To Scan For A Station In Fm Mode; Fm Radio Mode - Numan Mini One Benutzerhandbuch

FM radio mode receives analogue radio from the FM band and displays RDS (Radio Data System) information
about the station and show (where broadcast). To enter FM mode: Press Mode until the display shows FM
Mode.

SELECTING STATIONS

The first time you select FM radio, NUMAN Mini One is set to the lowest frequency in the FM band. On subse-
quent selections the last used frequency/station is displayed.

TO SCAN FOR A STATION IN FM MODE

Press Select .NUMAN Mini One scans up through the FM band frequencies, showing the current frequency on
the screen display. A scan stops when a signal is found. NUMAN Mini One can be set to stop at each station or
only at stations with a strong signal. Alternatively, you can tune, using the select control button on the top in 50
kHz steps.
PRESETS
NUMAN Mini One has 10 preset memories for FM, which work in the same way as DAB mode presets, as descri-
bed earlier.

FM RADIO MODE

52