Step 5-Connecting The Power Cable; Step 6-Replacing The Back Cover - elo ETL1525L-7SWA-1 Bedienungsanleitung

STEP 5-Connecting the Power Cable

Cable management clip
Brick power supply
Depending on where you live, you will use either the European or US/Cana-
dian power cable.
Connect the female end of the power cable to the Brick power supply.


Connect the Brick power cable into the power port on the touchmonitor.


Route the cable through the cable management clip.


Note: To protect your equipment against risk of damage from electrical surges
in the power line, plug the touchmonitor's power cord into a surge protector,
and then connect the surge protector to a grounded (three-pronged) AC electri-
cal outlet.

STEP 6-Replacing the Back Cover

When all the cables have been connected:
Replace the back stand cover.


Power on your PC then your touchmonitor. After a brief pause the pic-


ture should appear.
Elo Entuitive Touchmonitor
Touch Interface Connection
Connections on underside
Brick power cable port
Power
cable
LCD Desktop User Guide - 11