Remote Control - SOLIS DECO HEATER CLASSIC Bedienungsanleitung

R E M O T E C O N T R O L
L
• The symbols on the remote control correspond to the symbols on the control pa-
nel. If your appliance is in stand-by mode (power switch is at " I" ) then you can
start up the appliance using the remote control. Point the remote in the direction
of the appliance display, the max imum range is 6 meters.
1. O N /O FF: ON /OFF button
2. H E A T E R : Heating level button
3. + : Setting for timer or temperature
4 . – : Setting for timer or temperature
5. S W IN G : Oscillation function
6 . S H IFT : To activate the temperature
or timer setting
C H A N G I N G T H E B AT T E RY
1. Pull the battery holder out of the remote control.
2. Place a lithium battery CR2032 into the holder, taking note of the correct po-
larity. Slide the battery holder back into the remote control.
4 6
B attery h old er
B attery