SOLIS DECO HEATER CLASSIC Bedienungsanleitung Seite 44

F I R S T U S E
L
1 . C O N N E C T I N G H E AT E R T O M A I N S
• Plug the power plug in to a suitable power outlet.
• Press the power switch (H) into the " I" position. A signal tone will sound, the
appliance is ready for use.
• Press the power switch to the " 0" position, your appliance is now turned off
again.
2 . H O W T O U S E T H E D I S P L AY W I T H S E N S O R - B U T T O N S
1. O N /O FF: ON /OFF button
2. S W IN G : Oscillation function, so the appliance
swings left and right
3. H E A T E R : For high or low heating level
4 . + : Setting for temperature or timer
5. – : Setting for temperature or timer
6 . S H IFT : Activates the temperature or timer setting
O n th e d isplay, th e follow ing setting s m ay lig h t up:
• the high heating level is on
• the low heating level is on
• display field for setting the temperature or timer, respectively show
the current room temperature after setting
• the illuminated number refers to the temperature
• the illuminated number refers to the timer
• the oscillation function is on
• Y our appliance is in stand-by mode when the power switch is set to " I" . If you
press O N /O FF, your appliance w ill sw itch on. The current room temperature
and the sign " °C" is shown on the display.
• Press S H IFT and a " 0" lights up on the display and the symbol " H" . N ow you
can set th e d esired d uration of operation by using the + and - buttons. Each
time you press either of the buttons on the control panel, the number on the
display will go up or down by one hour. A setting of between 1 hour and 12
hours is possible. W hen you are no longer touching the control panel, the input
will blink 5 times, then it is saved and the current room temperature lights up
again.
4 4