Changing Or Deleting Program Data; Copying A Day Schedule; Memory Card; Replaying An Audio File - Monacor PA-1120DMT Bedienungsanleitung

GB
If required, create further program items (
To exit the menu, press the button MENU.

6.5.2 Changing or deleting program data

To change or delete a day program item, proceed
as described in the previous chapter. In step 7,
select the program location to be changed and then
press the button ENTER to confirm. The display will
show:
Program
Change
To enter new data for the program item, press the
button ENTER and proceed with step 8.
To delete the program item, press the button UP so
Delete
that
press the button ENTER. To exit the menu, press
the button MENU.

6.5.3 Copying a day schedule

To copy a programmed day schedule to another
weekday:
1) Press the button MENU (10). The display will
show:
Mode Set
Time
2) Press the button UP (12) so that
appear on the lower display line.
3) Press the button ENTER (6). The display will
now show:
Choose
Week Set
4) Press the button UP so that
appear on the lower line of the display.
5) Press the button ENTER. The display will now
show, for example:
Original
Mon
6) Use the button UP or DN (11) to select the
weekday of the day schedule to be copied.
7) Press the button ENTER. The display will now
show, for example:
Copy Day
Mon
8) Use the button UP or DN to select the weekday
to which the day schedule is to be copied; then
press the button ENTER.
The schedule will be copied and the menu will be
exited. To copy further weekday schedules, start
with step 1.
22
will appear on the lower line; then
Program
Day Copy

6.6 Memory card

step 7).
Using a memory card (type "microSD[HC]"), exter-
nally created recordings can be copied to the mem-
ory of the insertion module. The files must have
been saved in the format "mp3", "wav", "ogg" or
"flac" and their names must be identical to those of
the target storage locations to be used (e. g.
"M6.mp3" or "Voice09.mp3"). In addition, the file
size must not exceed the capacity of the corre-
sponding storage location:
"M1" to "M6": up to 2176 kBytes each
"Voice01" to "Voice20": up to 128 kBytes each
Insert the memory card into the slot "SD CARD" (5),
with the contacts facing downwards. Slide the card
into the slot until it engages. To remove the card,
slightly push the card so that it disengages.

6.6.1 Replaying an audio file

An audio file on a memory card can be replayed by
means of the menu. To allow for time-controlled
replay or for integration into a programmed mes-
sage sequence, however, the audio file must first
be copied to the internal memory of the insertion
module (
1) Press the button MENU (10). The display will
show:
Mode Set
will
Time
2) Press the button UP (12) or DN (11) repeatedly
until
line.
3) Press the button ENTER (6). The display will
now show:
will Choose
Play
Check SD Card
If
check if the card has been properly inserted into
the slot.
4) Press the button ENTER. The display will now
show:
PlayBack
Voice:01
5) Use the button UP or DN to select the audio file
to be replayed (
Voice:20
–
6) Press the button START/ STOP (14) to start the
replay. During replay, the indication on the first
line of the display will change to
If the replay fails to start, there may be no file
with the selected name on the memory card or
the name or the size of the file may not be cor-
rect.
chapter 6.6.2). To replay an audio file:
SD Card
appears on the lower display
appears on the display,
M:1 M:6
–
).
Voice:01
or
Playing
.