What To Do If; Simplified Eu Declaration Of Conformity - Becker Centronic Easycontrol Ec611 Montage- Und Betriebsanleitung

Problem
Drive is not functioning.
Opening code forgotten.
Programming code forgotten.

Simplified EU declaration of conformity

Becker-Antriebe GmbH hereby declares that this radio control system com-
plies with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
web address:
www.becker-antriebe.com/ce
Subject to technical changes without notice.
28 - en

What to do if...?

Insert a new battery.
Reduce distance from receiver.
Code button is not programmed in
receiver.
Program the code button.
Enter the correct code (again).
Press the "Bell" button before and
after entering the code.
Create a new opening code with the
aid of the master code (see Chan-
ging the opening code [} 23]).
Create a new programming code
with the aid of the master code (see
Changing the programming code
[} 24]).
Remedy