Changing The Programming Code - Becker Centronic Easycontrol Ec611 Montage- Und Betriebsanleitung

Changing the programming code

The purpose of the programming code is to link new receivers to the code but-
ton. The master code is required to change the programming code.
P
2
24 - en
Press the "P" button for approx. 1 second.
▻ The blue LED lights up and the green LED
flashes.
Now enter the master code. The master code is spe-
cified in information included with the product.
▻ The blue LED lights up and the green LED
flashes.
Press the "Bell" button.
▻ The blue LED lights up and the green LED
flashes quickly.
You can now enter the new programming code (max. 8
digits).
▻ The blue LED lights up and the green LED
flashes quickly.
Press the "2" button to confirm the new programming
code.
▻ The blue LED lights up and the green LED
flashes quickly.
Press the "Bell" button.
▻ The blue LED lights up and the green LED
goes out.
▻ Both LEDs go out.
► The new programming code is saved.